Category: PC

Official CWM a k a clock work mod recovery is now available for all models of Note Edge that includes N915S, N9150, N915F, N915G, N915P and N915T. Clockwork mod allows you to do all sorts of amazing mods on your Android phone including the ability to flash and install custom firmwares.

To flash it, download the appropriate version from below and flash using ODIN on your computer. Browse for the file in ODIN and put the phone in download mode. You can do this by pressing volume down + power button together for few seconds until the screen goes black and device restarts.

• n915s-cwm-recovery-6.0.5.1(1126).tar
• n9150-cwm-recovery-6.0.5.1(1126).tar
• n915f-cwm-recovery-6.0.5.1(1128).tar
• n915g-cwm-recovery-6.0.5.1(1128).tar
• n915p-cwm-recovery-6.0.5.1(1128).tar
• n915t-cwm-recovery-6.0.5.1(1128).tar

It shall be noted that installing CWM recovery on your Samsung Galaxy Note Edge voids the warranty.

XDA developer user upintheair has released a custom kernel for the Samsung Galaxy Note Edge which allows the users to overclock or under clock their devices. Here are the overclocking and underclocking speeds:

* CPU max frequency A15 cores = 2000 MHz (stock/default = 1900 MHz)
* CPU min frequency A15 cores = 500 MHz (stock/default = 700 MHz)
* CPU max frequency A7 cores = 1500 MHz (stock/default = 1300 MHz)
* CPU min frequency A7 cores = 200 MHz (stock/default = 400 MHz)

You need to be using N915S model (Exynos model) with CWM recovery installed. You should also be rooted.

This kernel supports overclocking and underclocking on only for Note Edge SM-N915S models

Here are features of this kernel

* ramdisk source:
* Built with Stock ARM Tool chain 4.7
* KNOX WARRANTY VOID: 1
* SELinux PERMISSIVE (for Titanium Backup and other apps to work correctly)
* TIMA disabled
* adb insecure
* init.d script support (drop in script & set permissions to 755 or 777 and reboot)
* busybox v1.22.0-Dream-IRC installed to /sbin
* Possible Screen Mirroring / AllShare Cast fix
* Secure storage = false (should prevent WIFI settings & passwords wiping on flash)
* Synapse app support for many kernel configurations + more
* lzo kernel compression
* Reduced logging
* F2FS support in source (not tested)
* exFAT FS support
* NTFS R/W support with app
* CIFS support (not tested)
* Frandom
* mount partitions NOATIME and NODIRATIME by default
* /proc/.config.gz support
* Much more – check source commits & change-log

Installation procedure

Watch >> THIS <<
Uninstall any CPU control apps, tweaks and scripts etc.
Ensure KNOX is disabled / removed (refer to “Requirements” section above for how-to)
Recommend: Install Wanam DVFS disabler, may help with better kernel control
Install Synapse app from Google Play and rate it ☆☆☆☆☆ !!
Flash with: CWM recovery
If flashing from previous SkyHigh kernel – Open Synapse app and RESET ALL SETTINGS GLOBALLY

• Download link

When it was released, the iPhone 6, like its predecessors, was an instant hit. People around the globe were clamoring for the device as either new iPhone owners or as an upgrade. The latest version of the iPhone, the iPhone 6, is being widely used for gaming purposes. In fact, many find the iPhone to be an ideal device for gamers. While previous versions of the iPhone worked well for gaming, the iPhone 6 is just that much better. Its dimensions make it easy to hold in one’s hands while playing their favorite games and at the same it provides more immersive experience as it packs a bigger display. Compared to the iPhone 5, the newer model has 0.7” bigger screen which makes a big difference in real life.

The iPhone 6 has a much larger and longer screen. While it still may not be as big as some Android phones, its length is important. With the longer screen, it makes for a 16:9 ratio which is the same as an HDTV. What this means for users is a screen that makes all mobile games look correct in landscape mode. For many who play mobile games, they find the experience much more pleasing with this new design. Another side benefit is that the iPhone 6 has a longer screen is that there is more room for the buttons and battery. Talking about battery, expect rise in battery runtimes by 30 percent.

Gamers point to this as another reason why they enjoy gaming on the iPhone. Many mobile have optimized online versions of certain games so they work well on the iPhone. The classic game of blackjack can be found for use on the iPhone. Blackjack is easy to learn and can be played quickly on mobile devices. The object of the game is to obtain a hand with a value of 21 or as close to that without going over.

Of course, it also matters what the dealer’s hand looks like. If the dealer has a hand that would beat the players, the dealer wins. On the other hand, if the dealer’s hand is less than the player’s, the player would win. Ties, also known as pushes, can also happen.

Microsoft has also brought some amazing desktop games like Age of Empires to iPhone and it looks wonderful on the big display. If you are a heavy gamer, consider getting the iPhone 6 Plus that packs even bigger display and battery.

Galaxy Alpha development at XDA can not exactly called on-the-roll as not a lot of people are buying it. Nevertheless an XDA developer member has released a custom firmware for it that is prerooted and zipaligned.

* Based on Latest Stock 4.4.4 Samsung firmware G850FXXU2BNJ3
* Prerooted, Zipaligned
* Full Deodex
* KNOX Free
* Init.d Software Support
* Insecure Stock Kernel with Init.d Support

There is only one problem with it – when you reboot it, the firmware forgets the Wi-Fi password. For that you will have to modify build.prop and change "ro.securestorage.support" from "true" to "false" and then it everything will work fine.

• Download link

XDA developers have finally released TWRP and CWM recovery for the Samsung Galaxy Alpha smartphone. Before proceeding with installation of TWRP or clock work mod recovery, make sure to backup your data and make sure you have a backup of a firmware.

Here are the installation instructions for downloading TWRP or CWM recovery

STEP 1 :
-Download and setup ADB drivers for your device can be found here Drivers !
STEP 2 :
-Download the recovery from —>
TWRP(more stable)
CWM
-Download odin 3 Link
-Turn of your device and go to odin mode [ Vol down + power + home button (all at the same time) ] release it when you see Galaxy Alpha logo
-Press vol up to confirm
STEP 3 :
-Now that you are in odin mode connect your device via usb cable !
-Now open Odin3 3.09 that you have downloaded.
-If there is a pop-up like Installing ADB drivers let it get finished it is usually updates !!!!
-Make sure the COM : xx (xx is USB port number it can be any number so don’t worry about it,just verify COM is lit up)
-Select the recovery (Link in STEP 2) ! Now select AP and browse to where you have .tar file and select it. Make sure you un-tick the auto-reboot button.
– Click Start. Once it says pass, remove the battery and then re-insert the battery and boot into recovery using volume up + home + power button.

How to root the Samsung Galaxy Alpha

– Download SuperSu (obviously the latest one) from here ——> Click here
– Copy that to internal sd card
– Power off your device and press vol up + power + home button (all at once)
– Select install zip from sdcard —>choose zip from sdcard —> scroll down and flash UPDATE-SuperSU-v2.xx.zip

In this tutorial we will show you how to enable call recording on Sony Xperia Z3 and Z2 android phones. While call recording is not legal in most parts of the world, many people use it. Sony did make call recording available on Xperia Z3 and Z2 but hide it for some reason.

Sony hide it in semcphone.apk but some XDA member was able to enable this feature and has made a simple APK file called callrecording.apk to make it available in phone dialer.

First you have to install this APK and then enable it by going into Settings > Call Settings > Call Recording. Check it and Accept notice, only if your country allow it. Now call recording button is on the top of outgoing calling screen. Call record is saved in /sdcard0/CallRecorder.

• Download the call recording apk

In this guide we will explain how to download and flash firmware for Samsung Galaxy Note 3 Neo SM-N750 android phone.

First download firmware from here:
I) Bangladesh – http://rapidgator.net/file/36ba0c121…71615.zip.html
II) India(INU) – http://rapidgator.net/file/af8780e8c…50602.zip.html
III) India(INS) – http://rapidgator.net/file/1ead801e6…72237.zip.html

Note: Phone Pro User is not responsible for bricked devices, dead SD cards.

Then, follow these instructions step by step:

1. Download Odin from here.
2. Extract Firmware zip file that you downloaded earlier from above link, you will get a .tar.md5 file and some other files (optional).
3. Extract Odin zip file and you will get Odin3 v3.09.exe along with few other files.
4. Power off your Android device. Wait 5-6 seconds for vibration to confirm complete switch off.
5. Now, put the Galaxy Note 3 Neo SM-N750 in Download Mode by pressing and holding down the Home and Volume Down button together while pressing the Power button. A warning screen will come up; press Volume Up button to enter Download Mode.
6. Now run Odin3 v3.09.exe (see Step 3) as an Administrator because Admin privileges is required to complete the process smoothly (only applicable Windows Vista and higher).
7. Now connect your device to your PC using USB cable. An “Added!!” massage will appear in Odin’s message box. If you don’t get the same then you should try another USB port (try USB port located in back in your desktop PC). If that too don’t work then you should reinstall the driver. If you successfully see the “Added!!” message in Odin then you are ready to go in next step. You should also see COM port with a number in Yellow if you successfully added your device.
8. Click the AP Button, and select that .tar.md5 file that you get in Step 2. If you are using old Odin then add the file to PDA button.
9. In Odin window, make sure only Auto Reboot and F. Reset Time check boxes are selected.
10. Double check everything that we mentioned in Step 8 & Step 9 above. Now, once satisfied hit the START button to begin the flashing process.

11. Once flashing completed, your Galaxy Note 3 Neo SM-N750 will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.

Folks at XDA have developed clock work mod recovery and TWRP for the Samsung Galaxy Note 3 Neo. Right now CWM recovery is available only for the N7505 version. The developers have released non-tar version as it does not increase counter.

• Download CWM from here

To install it root it first and use adb shell to install it. This is the command you have to type in:

dd if=/sdcard/recovery.img*of=dev/block/platform/msm_sdcc.1/by-name/recovery

Alternatively you can use Flashify from play store to install it.

On the other hand, TWRP for Note 3 Neo is compatible with all variants.

• Download TWRP’s zip file

Install using your existing recovery like you would any other zip. Reboot and select TWRP from the boot menu.

If you would like to install using ODIN, use a tar file from aforementioned link.

Many experts once said that Windows tablets will never be able to match the affordability of Android tablets. Well those folks have been proven wrong as many big companies have already started offering cheap windows 8 tablets. But what will Chinese OEMs react to this? Well some companies like Chuwi are offering their windows 8 tablets at incredibly low price tags. Their new Chuwi Vi8 tablet retails for mere 82 dollars.

Chuwi Vi8 specifications

For $82, you get a Chuwi Vi8 tablet that runs the latest version of Windows on an Intel Atom processor and free one year Office 365 subscription. Other specifications of Chuwi Vi8 include 8 inch, 1280 x 800 pixel IPS display, an Intel Atom Z3735F quad-core Bay Trail processor, 2 gigabytes of memory and 32GB of flash storage.

Why are some Windows 8 tablets so cheap?

The reason why some of companies are able to sell some windows 8 models so cheap is that Intel has been subsidizing certain models of Intel Atom family that has brought the overall cost of such devices very low.

Another and most important reason is waiving license fee of Windows. Microsoft is offering windows 8 for free to the device makers whose tablets are less than 10 inches in size. And to make the offer even better, Microsoft is throwing one year of free Office 365 subscription.

Intel has said that it will be waiving off its subsidies in 2015 which will result in cost of windows tablets going up.

• Check out the best tablets out there.

XDA members have finally been able to port the Samsung Galaxy Note 4 to the S4. This includes Galaxy Note 4 side softkey, settings, launcher, wallpaper picker, ultra power save mode, lockscreen, S-finder, flip board brief, S-planner, European accuweather widget and S-reminder.

For these Galaxy Note 4 applications you will require TouchWiz 4.4.4

1. Note 4 Side Softkey

1. Download and unpack my zip from here –> http://www.mediafire.com/?o6audcowsc29see
2. Put EasySideKey.apk im system/app and set correct permissions.
3. Put xml in my zip in system/etc/permissions and set correct permissions.
4. Reboot
5. Go to settings/display/one-handed operation/Side Key
(If you not found it install Note 4 settings)
6. Enjoy Side Key of Note 4

2. Note 4 Settings

Download –> http://www.mediafire.com/download/rr…ngs_Albe95.rar
Unpack and replace in system/priv-app (set correct permissions). Then reboot.

3. Wallpaper Picker

Download –> http://www.mediafire.com/download/74…icker_Note.apk
Put in system/priv-app (set correct permissions) and delete old SecWallpaperPicker. Then reboot.

4. Note 4 Touchwiz Launcher

Download –> http://www.mediafire.com/download/37…uchWizHome.apk
Put in system/priv-app (set correct permissions) and delete old SecLancher3. Then reboot.

5. Note 4 UPSM (Ultra Power Save)

1. Download from here xperiacle module.
2. Install as a normal apk
3. Enable it in Xposed and reboot
4. Open it from the drawer and choose "newer kitkat ROM" ( I test both and with the older I face more Force Close)
5. Click on "Proceed" and give it Root access
6. Tap on Reboot now (if not work make a full reboot manually)
7. Open your Filemanager and go to system/app
8. Here delete EmergencyLauncher, EmergencyModeService and EmergencyProvider
9. Download my Emergency Note 4 rar
10. Put my 3 apk inside the rar in system/app and set correct permissions
11. Reboot and open Note 3 Upsm mod from the drawer
12. Choose UPSM ON/OFF
13. Accept the Samsung Terms and condition
14. IMPORTANT: If like me you’ve double tap to sleep module (or some other that change the action with a double tap on statusbar) disable it from xposed and make a soft reboot.
15. Then re-open from the drawer Note 3 UPSM and re-choose Upsm ON/OFF
16. On the popup choose Enable and enjoy Note 4 Upsm
17. To disable it double tab on status bar and a popup for deactivate will shown.

6. Download Note 4 Lockscreen: Put in System/priv-app and set correct permissions. Then reboot.

7. Note 4 S Finder – download link

8. Fliboard Brief (New Magazine) – download link

9. Note 4 S Planner

Download Note 4 S Planner – Unpack rar and put apk in system folder. Remember to delete old SPlanner or SecCalendar_Spen (S5 or S4 version).

10. Note 4 European Accuweather Widget

Download —> http://www.mediafire.com/download/37…te4_Albe95.zip
Install via recovery and be sure to clean cache and data from titanium backup before put widget on homescreen.

11. Note 4 S Reminder

Download –> http://www.mediafire.com/?7sqho347h13ux5f

For following Note 4 applications you need to be on TouchWiz 4.4.2 or higher

1. Note 4 S Browser

Download link https://www.mediafire.com/?d05423b33qn5ms2

2. Note 4 Accuweather Widget

Download link https://www.mediafire.com/?nshu7vvtnxbqys9

3. Note 4 S Voice

Download –> http://www.mediafire.com/download/cz…d_phone(2).apk
This should fix "no voice bug" in S Voice.

4. Note 4 S Health

Instruction:
Download and install via recovery. If you don’t have a custom recovery:
1. First of all, uninstall previous version of S Health and Health Service and reboot
2. Unpack the zip
3. Put Health Service in system/app (and set correct permissions)
4. Install S Health as a normal apk
5. Put libPlatform in system/lib (and set correct permissions)
6. Reboot
7. If you have installed from recovery and you face crash when open S Health clear cache and data and delete apk with titanium backup. Then install apk from my zip manually.

5. Note 4 Smart Remote download link

6. Note 4 Geo News (full transparent) download link

7. Note 4 Galaxy Apps Widget (full transparent) download link

Note 4 Task Manager download link

Samsung Gear Manager download link

Snapbiz Card download link

All Together download link

S Memo download link

Story Album download link

Easy Chart for S Note download link