TWRP team has released custom recovery for the Samsung Galaxy M52 5G android phone. This would allow you to flash custom 3rd party ROMs onto your Samsung phone. Before you start flashing, keep in mind that this Samsung M52 TWRP custom recovery would only work on full stock devices.
So, if you have already rooted Samsung M52, you would have to roll back to the latest, official Android ROM. You would also need tools like Odin, Samsung USB drivers for PC and a disabled vbmeta image to flash the Samsung M52 TWRP custom recovery.
First, we will unlock the boot loader.
Open the Settings app, enter Developer Options and enable OEM unlocking (If you don’t see Developer Options, enter into About phone>Software info and tap “Build number” 10 times to show it).
Enter Download Mode: to do so power off your device, connect it to a computer via an USB cable and hold both volume up and volume down buttons.
Long press volume up to unlock the bootloader. This will wipe your data and your phone will automatically reboot.
Go through the initial setup. Skip through all the steps since data will be wiped again later. Make sure to connect the device to Internet during the setup.
Enter Developer Options and check that the OEM unlocking option exists and is grayed out. This means our bootloader is unlocked and your phone has no KnoxGuard lock set.
Then follow these steps.
Connect your phone to your PC and boot in Download Mode (power off your device and hold both volume up and volume down buttons).
Open Odin3, select the TWRP tar by clicking the “AP” button and the patched vbmeta tar by clicking “USERDATA”, then press the Start button.
Reboot your phone in recovery mode: while it still plugged in your PC, hold both the power and volume up buttons.
Once TWRP has booted you need to format again your data partition in order to be able to boot in system again. To do so touch Wipe>Format Data and follow the instructions in screen.